Squad – Comprehensive Guide to Server Administration, Mods, and Private Server Tools
Category: Shooter
Introduction
Squad is a tactical first-person shooter that bridges the gap between arcade shooters and military realism with 100-player battles, combined-arms warfare, and base building . The game’s modification ecosystem is built around server-side control and community-created content, with three distinct pathways for customization: legitimate server administration tools and console commands, modding through the Steam Workshop and official SDK, and prohibited third-party trainer applications that carry significant risks.
Server Administration Console Commands
The safest and most powerful way to influence Squad gameplay is through the server administration console, which gives authorized admins extensive control over match settings and player management .
Enabling Admin Commands
To use admin commands, you must have admin permissions on a server or run your own local/private server . Open the console using the tilde key (~) and enter the appropriate command.
Essential Admin Commands
Player Management:
AdminKick [name] – Removes a player from the server.
AdminBan [name] – Bans a player. Enter 0 for permanent, 1d for one day, etc.
AdminWarn [name] [reason] – Issues a warning to a player.
AdminRemovePlayerFromSquad [name] – Removes a player from their squad without kicking them.
AdminDemoteCommander [name] – Demotes a specific player from commander.
AdminDisbandSquad [TeamNumber] [SquadIndex] – Disbands a specific squad on either team.
AdminForceTeamChange [name] – Switches a player to the other team.
AdminListDisconnectedPlayers – Shows recently disconnected player IDs with associated SteamIds.
Match and Server Control:
AdminEndMatch – Manually ends the current match.
AdminPauseMatch – Pauses the match.
AdminUnpauseMatch – Resumes a paused match.
AdminChangeLayer [name] – Changes to a specific map layer.
AdminSetNextLayer [name] – Queues a map for the next match.
AdminRestartMatch – Forcibly restarts the current match.
AdminSetMaxNumPlayers [number] – Sets server player cap.
AdminSetServerPassword [password] – Converts server to private; leave blank for public.
AdminSetPublicQueueLimit [number] – Caps connection queue. 0 disables public queue, -1 allows unlimited.
Gameplay Modifiers:
AdminSlomo – Slows down gameplay speed server-wide.
AdminNoRespawnTimer – Removes respawn delay.
AdminNoTeamChangeTimer – Disables the team switch timer.
AdminForceAllDeployableAvailability – Allows deployables anywhere.
AdminForceAllRoleAvailability – Ignores kit restrictions.
AdminDisableVehicleClaiming – Turns off vehicle claiming.
AdminCreateVehicle [VehicleLink] – Spawns a vehicle instantly. A full list of vehicle links is available on the Squad Wiki .
AdminNetTestStart and AdminNetTestStop – Initiates and stops network tests.
TraceViewToggle – Traces lines from the center of the screen to nearby objects .
Public Commands
Players can use these commands without admin rights :
ChangeTeams – Switches to the other side.
ChangeTeamsWithId [NewTeam] – Changes to specified team number; 0 switches sides.
CreateRallyPoint – Drops a rally point for squad spawns.
CreateSquad [Name] – Requests squad creation.
ChatToAll, ChatToTeam, ChatToSquad – Sends messages to specific channels.
ListPlayers – Lists player IDs and SteamIds.
ListSquads – Lists squads by index number.
LeaveSquad – Leaves current squad.
Respawn – Forces player respawn.
DisableUI – Removes UI components from the screen.
HighResShot [Resolution/Multiplier] – Takes a screenshot (e.g., "HighResShot 3840x2160") .
Modding and Community Content
Squad has an active modding community centered around the Steam Workshop, with over 600 active items . Mods range from custom maps and factions to total conversions like Steel Division and Global Escalation.
How Modding Works
Community mods live on the Steam Workshop, which is the canonical platform for Squad modding . To use mods on a dedicated server, you point the server at a Workshop ID, the server pulls the content, and players are prompted to download the mod when they join .
Creating Mods (Official SDK)
The official Squad SDK, available through the Epic Games launcher, allows users to create custom content. The Modding Hub wizard automates the process for creating a Squad mod .
Requirements:
You will need the Squad SDK installed. Read the instructions on the SDK page carefully before beginning .
Using the Modding Hub:
Left click the Modding Hub button at the top right of the Squad SDK .
Select "Create Squad Mod".
Enter a Mod Name (no spaces or special characters), Mod Description, and Steam Image Preview.
The wizard creates a new mod folder in Squad\Squad\Plugins\Mods\, a modinfo.smi configuration file, and a Content folder for your assets .
Organizing Assets:
All assets for your mod must be stored in your mod's Content folder. To access it:
Open the Content Browser in the SDK.
Click View Options and enable "Show Plugin Content" .
Click the three-line menu and scroll down to find your mod's content folder. Double click to select it .
Updating Project Settings:
With the 2.0 Layer Overhaul, the Asset Manager helps the game get the list of Levels, Layers, Faction, and Faction Setups. Access this in Project Settings and add your mod's path .
Custom Map Layers:
To create a custom map layer, you can copy an existing gamemode layer from an OWI map rather than building from scratch . Load the OWI map, select all actors in the World Outliner (filtering to "Only in Current Level"), copy them, and paste into your duplicated map .
Creating a Custom Map:
To create a new map from scratch, load the map into the editor via File -> Open Level, then File -> Save Current As and select your mod's content directory .
Popular Mods
Map Mods: Wil's Fools Road (Workshop 3040351557) updates an older map with new foliage and points of interest. SquadMaps.com is a useful index for finding current map mods .
Total Conversion Mods: Steel Division (Workshop 2432926361) adds night vision, thermals, suppressors, drones, attack helicopters, and cross-team VOIP. Global Escalation (Workshop 3014073690) offers 27 factions and custom drone mechanics .
Custom PvE Missions: Since Squad's 10.x PvE mode, Custom Fireteam PvE missions have become popular for small co-op sessions .
Prohibited Third-Party Tools
Third-party applications that modify game behavior exist but pose significant risks.
Squad Tactical Assistant
A GitHub project called Squad Tactical Assistant provides server administration and training utilities for local/private servers .
Features:
Vehicle Invincibility (F1), Unlimited Vehicle Ammo (F2), Instant Vehicle Repair (F3)
No Suppression (F4), No Stamina Loss (F5), Unlimited Bandages (F6)
Unlock Map Zoom (F7), Show Enemy Positions (F8 – Admin only)
Admin Camera / Free Cam (F9), Third Person View (F10)
Super Speed (F11), Super Jump (F12)
Toggle All Features (Ctrl+F1), Reset to Default (Ctrl+F2)
Installation:
Download the ZIP archive.
Extract with password: 5868781 .
Run Squad_Assistant.exe as Administrator.
Launch Squad on a local or private server only .
Risks and Warnings:
The developer explicitly warns: "Will I get banned? – Yes, if used on official/public servers. Use only on local/private servers" . The tool interacts with game memory, triggering antivirus warnings, which the developer describes as false positives . Using this tool on any public or official server violates server rules and will result in a ban.
Mod Engine Platform
A Mod Engine platform lists Squad among supported games, with a basic trainer and instructions similar to using Cheat Engine tables . The tool supports Steam, Microsoft Store GamePass, and Epic Games versions. The developers note that the trainer does not have any anti-cheat bypass or special usage instructions, and they tested it on Steam .
Easy Anti-Cheat and Linux Compatibility
Squad is protected by Easy Anti-Cheat (EAC). The game does not have a native Linux build but can be played through Proton . Offworld Industries supports Linux compatibility and has addressed EAC issues on Linux .
Common EAC errors include "Untrusted system file" warnings, which can often be resolved by updating graphics drivers, verifying game file integrity through Steam, repairing EAC, or updating Windows .
Frequently Asked Questions
Q: Will using a trainer or mod get me banned in Squad?
A: Third-party trainers (like Squad Tactical Assistant) will result in a ban if used on official or public servers . Server administration commands and mods from the Steam Workshop are legitimate and safe when used according to server rules.
Q: How do I use admin commands?
A: Press the tilde key (~) to open the console on a server where you have admin permissions . Or run your own local/private server to test commands without restrictions.
Q: What is the difference between a trainer and a mod?
A: A trainer is an external application that modifies game memory, often used for cheating. A mod is community-created content that adds new maps, factions, or gameplay features, distributed through the Steam Workshop .
Q: Are there safe ways to use "cheat-like" features?
A: Yes. By running your own server, you can use legitimate admin commands for training purposes: AdminSlomo for speed control, AdminNoRespawnTimer to remove respawn delays, and AdminCreateVehicle to spawn vehicles .
Q: Why does my antivirus flag Squad Tactical Assistant?
A: The tool interacts with game memory, which triggers heuristic detection. The developer describes this as a false positive .
Q: Can I play Squad with mods on Linux?
A: Squad runs through Proton, and EAC supports Linux. Offworld Industries addresses Linux compatibility issues through the Squad Community Discord .
Conclusion
Squad offers three distinct paths for customization. Server administration console commands provide the safest and most powerful way to influence gameplay for authorized admins, covering everything from player management to match control and vehicle spawning . The modding ecosystem, centered around the Steam Workshop, allows players to add new maps, factions, and total conversions, with official SDK tools available for content creators . Third-party trainers like Squad Tactical Assistant exist but carry a high risk of bans if used outside local/private servers . For legitimate customization, the built-in admin commands and Workshop mods provide a rich set of options without compromising account safety.
About This Mod
Introduction
Squad is a tactical first-person shooter that bridges the gap between arcade shooters and military realism with 100-player battles, combined-arms warfare, and base building . The game’s modification ecosystem is built around server-side control and community-created content, with three distinct pathways for customization: legitimate server administration tools and console commands, modding through the Steam Workshop and official SDK, and prohibited third-party trainer applications that carry significant risks.
Server Administration Console Commands
The safest and most powerful way to influence Squad gameplay is through the server administration console, which gives authorized admins extensive control over match settings and player management .
Enabling Admin Commands
To use admin commands, you must have admin permissions on a server or run your own local/private server . Open the console using the tilde key (~) and enter the appropriate command.
Essential Admin Commands
Player Management:
AdminKick [name] – Removes a player from the server.
AdminBan [name] – Bans a player. Enter 0 for permanent, 1d for one day, etc.
AdminWarn [name] [reason] – Issues a warning to a player.
AdminRemovePlayerFromSquad [name] – Removes a player from their squad without kicking them.
AdminDemoteCommander [name] – Demotes a specific player from commander.
AdminDisbandSquad [TeamNumber] [SquadIndex] – Disbands a specific squad on either team.
AdminForceTeamChange [name] – Switches a player to the other team.
AdminListDisconnectedPlayers – Shows recently disconnected player IDs with associated SteamIds.
Match and Server Control:
AdminEndMatch – Manually ends the current match.
AdminPauseMatch – Pauses the match.
AdminUnpauseMatch – Resumes a paused match.
AdminChangeLayer [name] – Changes to a specific map layer.
AdminSetNextLayer [name] – Queues a map for the next match.
AdminRestartMatch – Forcibly restarts the current match.
AdminSetMaxNumPlayers [number] – Sets server player cap.
AdminSetServerPassword [password] – Converts server to private; leave blank for public.
AdminSetPublicQueueLimit [number] – Caps connection queue. 0 disables public queue, -1 allows unlimited.
Gameplay Modifiers:
AdminSlomo – Slows down gameplay speed server-wide.
AdminNoRespawnTimer – Removes respawn delay.
AdminNoTeamChangeTimer – Disables the team switch timer.
AdminForceAllDeployableAvailability – Allows deployables anywhere.
AdminForceAllRoleAvailability – Ignores kit restrictions.
AdminDisableVehicleClaiming – Turns off vehicle claiming.
AdminCreateVehicle [VehicleLink] – Spawns a vehicle instantly. A full list of vehicle links is available on the Squad Wiki .
AdminNetTestStart and AdminNetTestStop – Initiates and stops network tests.
TraceViewToggle – Traces lines from the center of the screen to nearby objects .
Public Commands
Players can use these commands without admin rights :
ChangeTeams – Switches to the other side.
ChangeTeamsWithId [NewTeam] – Changes to specified team number; 0 switches sides.
CreateRallyPoint – Drops a rally point for squad spawns.
CreateSquad [Name] – Requests squad creation.
ChatToAll, ChatToTeam, ChatToSquad – Sends messages to specific channels.
ListPlayers – Lists player IDs and SteamIds.
ListSquads – Lists squads by index number.
LeaveSquad – Leaves current squad.
Respawn – Forces player respawn.
DisableUI – Removes UI components from the screen.
HighResShot [Resolution/Multiplier] – Takes a screenshot (e.g., "HighResShot 3840x2160") .
Modding and Community Content
Squad has an active modding community centered around the Steam Workshop, with over 600 active items . Mods range from custom maps and factions to total conversions like Steel Division and Global Escalation.
How Modding Works
Community mods live on the Steam Workshop, which is the canonical platform for Squad modding . To use mods on a dedicated server, you point the server at a Workshop ID, the server pulls the content, and players are prompted to download the mod when they join .
Creating Mods (Official SDK)
The official Squad SDK, available through the Epic Games launcher, allows users to create custom content. The Modding Hub wizard automates the process for creating a Squad mod .
Requirements:
You will need the Squad SDK installed. Read the instructions on the SDK page carefully before beginning .
Using the Modding Hub:
Left click the Modding Hub button at the top right of the Squad SDK .
Select "Create Squad Mod".
Enter a Mod Name (no spaces or special characters), Mod Description, and Steam Image Preview.
The wizard creates a new mod folder in Squad\Squad\Plugins\Mods\, a modinfo.smi configuration file, and a Content folder for your assets .
Organizing Assets:
All assets for your mod must be stored in your mod's Content folder. To access it:
Open the Content Browser in the SDK.
Click View Options and enable "Show Plugin Content" .
Click the three-line menu and scroll down to find your mod's content folder. Double click to select it .
Updating Project Settings:
With the 2.0 Layer Overhaul, the Asset Manager helps the game get the list of Levels, Layers, Faction, and Faction Setups. Access this in Project Settings and add your mod's path .
Custom Map Layers:
To create a custom map layer, you can copy an existing gamemode layer from an OWI map rather than building from scratch . Load the OWI map, select all actors in the World Outliner (filtering to "Only in Current Level"), copy them, and paste into your duplicated map .
Creating a Custom Map:
To create a new map from scratch, load the map into the editor via File -> Open Level, then File -> Save Current As and select your mod's content directory .
Popular Mods
Map Mods: Wil's Fools Road (Workshop 3040351557) updates an older map with new foliage and points of interest. SquadMaps.com is a useful index for finding current map mods .
Total Conversion Mods: Steel Division (Workshop 2432926361) adds night vision, thermals, suppressors, drones, attack helicopters, and cross-team VOIP. Global Escalation (Workshop 3014073690) offers 27 factions and custom drone mechanics .
Custom PvE Missions: Since Squad's 10.x PvE mode, Custom Fireteam PvE missions have become popular for small co-op sessions .
Prohibited Third-Party Tools
Third-party applications that modify game behavior exist but pose significant risks.
Squad Tactical Assistant
A GitHub project called Squad Tactical Assistant provides server administration and training utilities for local/private servers .
Features:
Vehicle Invincibility (F1), Unlimited Vehicle Ammo (F2), Instant Vehicle Repair (F3)
No Suppression (F4), No Stamina Loss (F5), Unlimited Bandages (F6)
Unlock Map Zoom (F7), Show Enemy Positions (F8 – Admin only)
Admin Camera / Free Cam (F9), Third Person View (F10)
Super Speed (F11), Super Jump (F12)
Toggle All Features (Ctrl+F1), Reset to Default (Ctrl+F2)
Installation:
Download the ZIP archive.
Extract with password: 5868781 .
Run Squad_Assistant.exe as Administrator.
Launch Squad on a local or private server only .
Risks and Warnings:
The developer explicitly warns: "Will I get banned? – Yes, if used on official/public servers. Use only on local/private servers" . The tool interacts with game memory, triggering antivirus warnings, which the developer describes as false positives . Using this tool on any public or official server violates server rules and will result in a ban.
Mod Engine Platform
A Mod Engine platform lists Squad among supported games, with a basic trainer and instructions similar to using Cheat Engine tables . The tool supports Steam, Microsoft Store GamePass, and Epic Games versions. The developers note that the trainer does not have any anti-cheat bypass or special usage instructions, and they tested it on Steam .
Easy Anti-Cheat and Linux Compatibility
Squad is protected by Easy Anti-Cheat (EAC). The game does not have a native Linux build but can be played through Proton . Offworld Industries supports Linux compatibility and has addressed EAC issues on Linux .
Common EAC errors include "Untrusted system file" warnings, which can often be resolved by updating graphics drivers, verifying game file integrity through Steam, repairing EAC, or updating Windows .
Frequently Asked Questions
Q: Will using a trainer or mod get me banned in Squad?
A: Third-party trainers (like Squad Tactical Assistant) will result in a ban if used on official or public servers . Server administration commands and mods from the Steam Workshop are legitimate and safe when used according to server rules.
Q: How do I use admin commands?
A: Press the tilde key (~) to open the console on a server where you have admin permissions . Or run your own local/private server to test commands without restrictions.
Q: What is the difference between a trainer and a mod?
A: A trainer is an external application that modifies game memory, often used for cheating. A mod is community-created content that adds new maps, factions, or gameplay features, distributed through the Steam Workshop .
Q: Are there safe ways to use "cheat-like" features?
A: Yes. By running your own server, you can use legitimate admin commands for training purposes: AdminSlomo for speed control, AdminNoRespawnTimer to remove respawn delays, and AdminCreateVehicle to spawn vehicles .
Q: Why does my antivirus flag Squad Tactical Assistant?
A: The tool interacts with game memory, which triggers heuristic detection. The developer describes this as a false positive .
Q: Can I play Squad with mods on Linux?
A: Squad runs through Proton, and EAC supports Linux. Offworld Industries addresses Linux compatibility issues through the Squad Community Discord .
Conclusion
Squad offers three distinct paths for customization. Server administration console commands provide the safest and most powerful way to influence gameplay for authorized admins, covering everything from player management to match control and vehicle spawning . The modding ecosystem, centered around the Steam Workshop, allows players to add new maps, factions, and total conversions, with official SDK tools available for content creators . Third-party trainers like Squad Tactical Assistant exist but carry a high risk of bans if used outside local/private servers . For legitimate customization, the built-in admin commands and Workshop mods provide a rich set of options without compromising account safety.
Creative Team
Community modders have created this amazing content to enhance your gaming experience.
Compatible Platforms
PC XBOX PS4Works on all major platforms. Check system requirements before downloading.
Download
ratings
reviews (5)
Maria Rodriguez
What an amazing piece of work! The new content fits perfectly with the base game. I've been recommending this to all my friends.
15 Dec, 2023
Mike Thompson
Best mod I've ever installed! The quality is outstanding and it adds so much depth to the game. Can't imagine playing without it now.
10 Jan, 2024
Sophie Turner
It's okay. Not bad but not groundbreaking either. Does what it says, but I was hoping for something more innovative. Still decent work.
10 Dec, 2023
Marcus Webb
This is absolute gold! The attention to detail is incredible and the new features are well-integrated. Makes the game feel fresh and exciting again.
08 Dec, 2023
Jessica Brown
Decent mod but I expected more based on the description. It's good but could use some improvements and additional features. Still worth checking out.
03 Jan, 2024
